Dip powder systems: powder, cyanoacrylate base and activator as components

The cyanoacrylate dip-powder systems discussed here harden without a UV lamp. Powder used over a UV gel is a different type of system. NailKnowledge's Doug Schoon describes dipping systems as non-UV curing, based mostly on cyanoacrylate monomers, with acrylic powder added for strength. One real kit page, the KISS Salon Dip kit, labels its parts as a base gel, an activator, a top gel and a dip powder, and lists ethyl cyanoacrylate and polymethyl methacrylate in both gels. This article explains those components and how a dip differs from acrylic powder sprinkled onto UV gel; it gives no application steps. [1][2]
KEY TAKEAWAYS
- Dipping systems are non-UV curing and based mostly on cyanoacrylate monomers, according to NailKnowledge, even though the KISS kit labels its two cyanoacrylate layers base gel and top gel. [1][2]
- Cyanoacrylates set when they meet surface moisture, and cyanoacrylate-based polymers stay highly sensitive to water or moisture. [2][3]
- A dip is not the same as powder over UV gel: in the second system acrylic powder is sprinkled over a UV gel coating before UV curing. [2]
- The activator is a separate component. A 1997 patent describes an activator containing solvent and a polymerisation initiator, but it is not a specification for the current KISS kit. [1][4]
- The KISS example is a US listing, not an EU product recommendation. Official Regulation (EU) 2025/877 adds N,N-dimethyl-p-toluidine(CAS 99-97-8) to Cosmetics Regulation Annex II and applies from 1 September 2025. A US ingredient list cannot establish a European product’s formula or compliance. [1][6]
The parts of a dip system
The KISS Salon Dip kit page lists ingredients by component: a base gel, an activator, a top gel, a brush softener and a dip powder. Its labels give the base gel and the top gel the same ingredients: ethyl cyanoacrylate, polymethyl methacrylate and BHT. The activator lists acetone, ethyl acetate and dimethyl tolylamine first, then water, fragrance and eight more ingredients, and the brush softener lists acetone and a colourant. The dip powder's ingredient text is cut off on the page, so its composition cannot be read there. The kit contents listed are the brush-on gel, powder, activator, two brushes, a dipping tray, a cuticle stick, a sponge, a file and 40 tips; no lamp is listed. This is one US store listing for one kit; other kits, and other regions' labels, may differ. [1]
Editorial inference: the word gel on those labels is a product name rather than a curing class. Schoon describes dipping systems as non-UV curing and says UV gels are mostly based on urethane acrylate resins, whereas the base and top layers in the kit list a cyanoacrylate. The KISS page itself states that no UV curing lamp is needed. Its use of the word gel does not override that product-specific instruction. [1][2]
How a cyanoacrylate layer sets and what the activator may do
Cyanoacrylates are fast-setting adhesives sold as liquids in the presence of stabilizers. A 2018 review in Molecules by Duffy, Zetterlund and Aldabbagh (the first author is affiliated with Henkel Ireland, a maker of the Loctite adhesives the paper mentions) states that rapid anionic polymerisation on exposure to surface moisture is responsible for instant adhesion, and that in an adhesive context curing starts from the thin film of moisture found on most surfaces. Schoon adds that cyanoacrylate-based polymers are highly sensitive to water or moisture. The two statements differ: one is about how the liquid starts to set, the other about how the finished polymer behaves. [2][3]
The KISS page lists an activator but does not explain each ingredient’s role. A 1997 US patent by Renee Resler describes an activator containing solvent and a polymerisation initiator for a cyanoacrylate nail coating. That is a historical formulation description, not the current kit’s specification, and no recipe or application method is reproduced here. [1][2][4]
Dip powder versus powder over UV gel
Schoon separates the two. In dipping systems, acrylic powder replaces the fibreglass or silk once used for strength, and it is the kind of acrylic powder used for liquid-and-powder enhancements. In a powder gel, a nail professional sprinkles acrylic powder over the surface of a UV gel coating before UV curing. In both descriptions the powder is acrylic powder; what differs is the layer that holds it. [2]
| Question | Cyanoacrylate dipping system | Powder over UV gel |
|---|---|---|
| Layer holding the powder [2] | A cyanoacrylate-based layer (dipping systems are based mostly on cyanoacrylate monomers) | A UV gel coating (UV gels are mostly based on urethane acrylate resins) |
| How it hardens [2] | Non-UV curing | UV curing of the gel after the powder is applied |
| Sensitivity to water or moisture [2] | Cyanoacrylate-based polymers are highly sensitive to water or moisture | Not addressed in the article read |
Reading the activator line on a label, by region
The example above is a US store listing. Its activator names Dimethyl Tolylamine. A third-party CosIng mirror associates that INCI name with CAS 99-97-8; it is an identification aid rather than official legal text. Separately, Commission Regulation (EU) 2025/877 lists N,N-dimethyl-p-toluidine, CAS 99-97-8, as added entry 1745 of Cosmetics Regulation Annex II, the prohibited-substance list. Article 2 says the regulation applies from 1 September 2025; entry into force is a different date. The official Spanish text was read through Spain’s state-gazette site because EUR-Lex returned a browser challenge. This article does not establish the formula or compliance of any current European kit; use its exact EU documentation. [1][5][6]
A hypothetical purchasing check
Hypothetical example: a kit page labels its layers base gel, activator and top gel and shows no lamp. A reader who assumes gel means lamp curing, or who assumes a dip powder is interchangeable with powder used over a UV gel, is relying on vocabulary. The opened sources support a narrower reading: dip layers are cyanoacrylate-based and non-UV, powder over UV gel is a different system, and the instructions and safety data sheet of the exact kit decide what applies. [1][2]
Article Sources
- KISS (kissusa.com) - Kiss Salon Dip Professional Dipping System | 40 French & Natural Acrylic Tips, Starter Kit, Salon Dip, Dip Powder
Commercial source material
Ingredients section of the product page for the KISS Salon Dip kit (page heading: Kiss Salon Dip Professional Dipping System | 40 French & Natural Acrylic Tips, Starter Kit, Salon Dip, Dip Powder): the Base Gel, Activator, Top Gel and Brush Softener ingredient lists and the kit contents line; the Dip Powder ingredient text is truncated and garbled on the page.
- NailKnowledge (author Doug Schoon) - Powder Gels and Dipping Systems
Expert reference material
Article body of Powder Gels and Dipping Systems (5 July 2022): the sentences that dipping systems are non-UV curing, are based mostly on cyanoacrylate monomers, replace fiberglass or silk with acrylic powder, that cyanoacrylate-based polymers are highly sensitive to water or moisture, that UV gels are mostly based on urethane acrylate resins, and the example of sprinkling acrylic powder over a UV gel coating before UV curing. The article does not mention an activator.
Source date:
- Molecules 2018, 23(2), 465 (MDPI); authors Cormac Duffy, Per B. Zetterlund and Fawaz Aldabbagh - Radical Polymerization of Alkyl 2-Cyanoacrylates
Primary source
Abstract and sections 1 and 2.1 (pages 1 and 2 of the PDF): cyanoacrylates as fast-setting adhesives sold as liquids with stabilizers, rapid anionic polymerization on exposure to surface moisture responsible for instant adhesion, and curing through rapid initiation from the thin film of moisture on most surfaces. DOI 10.3390/molecules23020465.
Source date:
- United States Patent and Trademark Office, via Google Patents; inventor Renee Resler - Composition and method for applying protective coating on a nail surface (US Patent 5,650,138)
Primary source
Background and Summary passages of US Patent 5,650,138 (granted 22 July 1997): the description of a prior-art method in which a solvent solution with activator, such as dimethyl-para-toluidine, is brushed across the adhesive or sprayed, and the definition that the polymerization initiator refers to a compound capable of polymerizing the adhesive.
Source date:
- CosIng Checker (third-party site that mirrors EU CosIng data) - DIMETHYLTOLYLAMINE (CosIng ingredient page)
Trade publication material
Ingredient page for DIMETHYLTOLYLAMINE: INCI name, chemical name N,N,4-trimethylaniline, CAS 99-97-8, EC 202-805-4, and a linked EU Annex II record (entry 1745, N,N-dimethyl-p-toluidine) marked as a prohibited entry.
- Official Journal of the European Union, Spanish text hosted by Agencia Estatal Boletín Oficial del Estado - Reglamento(UE)2025/877 de la Comisión, de12de mayo de2025
Primary source
Article 2, printedp2: entry into force20days after OJ publication; applicable1September2025. Annex, printedp4: entry 1745,N,N-dimetil-p-toluidina,CAS 99-97-8,EC202-805-4.
Source date:
Products and resources
Our related modelling department lists gels, forms and accessories. This link does not claim a classical liquid-and-powder or cyanoacrylate dip range, stock, or compatibility with the system explained here. NailMarket modelling gels and forms
Brand resource only; no A1/A2 technical, launch, testing or certification claim. BELOM equipment project







